MPS Spyder Nitrous Spray System With a 1 lb. Bottle
The Spyder Nitrous Spray System uses 4 individual flare jets for exact distribution of nitrous to each cylinder. This eliminates problems with uneven distribution associated with larger nitrous shots in dry nitrous systems
Spyder Nitrous comes with whatever jets you specify
The nitrous enters the air box through a –4 bulkhead fitting on the bottom rear of the air box. The bulkhead fitting inside the air box is connected to the distribution block via a –4 line. From the distribution block the nitrous passes through the 4 individual jets and through the stainless steel tubes into the appropriate port
The Spyder Nitrous System is capable of producing 200 horsepower when used with the proper components
The Spyder Nitrous Spray System was specifically designed for Suzuki Hayabusa, but can be easily adapted to most other fuel injected sport bikes. Let us know the year and model of your bike for proper fitment
1999-2007 Hayabusa requires two short stacks
Please specify jetting required. The following chart is a guideline only. Below are horsepower increases as measured at rear wheel. Every 10 horsepower can reduce your 1/4 ET as much as .1 seconds or more. Bear in mind there are many variables such as bike model, nozzle type and method of distribution.
