MPS Dry Nitrous Kit For Fuel Injected Motorcycles
Just imagine another 20 to 40 horsepower in just 2 hours! That’s the reality of our Dry Nitrous Kit For Fuel Injected Motorcycles. Flip the switch to activate the nitrous and turn your starter button into a horsepower button. Our kit comes complete with all wiring. The MPS Dry Nitrous Kit was designed to easily increase horsepower of a four cylinder fuel injected motorcycle. These Dry Nitrous Kits exploit the ability to add fuel and yield between 20 and 40 horsepower. They are strictly for fuel injected motorcycles. The MPS Dry Nitrous Kit For Fuel Injected Motorcycles is for use in closed course competition events only and are not for use on any public street or highway.
Danger: Nitrous bottles can explode. Never exceed 1000 lbs of bottle pressure. Nitrous pressures over 1000 lbs or so can prevent the nitrous solenoid from opening. Do not expose the bottle to direct sunlight or leave the bottle enclosed in a container in direct sunlight. If you mount your bottle in your trunk or under the seat be sure to take the bottle out before letting the bike sit in the sun. Nitrous gains pressure with temperature. Do not mount the bottle near any source of heat. You will need to find a place that the bottle is out of sight, away from heat, secure, and accessible. Above the motor, under the tank is not a good spot in other words! To heat your bottle, use a bottle warmer, not a torch!
Easy 2 Hour Installation
Complete Installation Instructions
Stealth Starter Button Activation
1lb. Nitrous Bottle
Push in Fittings
3 Different Power Levels
